Oh yes I realize that. And hey did you just call me Vitaliy?
Adam
On Sat, 21 Jun 2003, Adrian T Sindile wrote:
> Hi, Adam!
>
> > Working with Yuan, we could not reproduce the problem. There had been made no changes
> > between then and now except with database permissions ( not the ion polarimeter
> > database) as discussed previously. Maybe it was a sideaffect because of it, maybe
> > not.
>
> The problems reported by Genya and Vitaliy were two different problems in
> my opinion.
> Genya mentioned "database" for ion polarimeter, which was not the case as
> we were using a file.
> Vitaliy was right and the permissions could have created the problem he
> reported. That should be fixed now.
>
> Adrian
>
>
>
> >
> > If you think you see it again let me know.
> >
> > Cheers,
> > Adam
> >
> >
> >
> > In any case
> >
> > Adam DeGrush wrote:
> >
> > > Since you changed 12.8 to 13.2 so that now you are not using 12.8, I'm unsure how
> > > you determined 12.8 was changing unless you went to the crate level control and
> > > saw it change. I just checked it right now and it seems to work.
> > >
> > > In response to Bill's question, there is no log of the voltages. If you want to
> > > see if they are currently set correctly go to the crate level control, and hit
> > > "MV" and "DV" buttons and look at what appears in the ioc boot window. What will
> > > be displayed are the send and receive messages for all the slots. Since there is
> > > no mapping and gremlins aside, match up the slot/channel with your detector
> > > channels. I haven't checked that the gui has mapped all the channels from the new
> > > database correcly, so it is possible that something is wrong.
> > >
> > > Cheers,
> > > Adam
> > >
> > > yxiao@MIT.EDU wrote:
> > >
> > > > Hi, Adam,
> > > >
> > > > > To make them even more permanent, Yuan knows where the simple text file
> > > > > that records them is.
> > > >
> > > > I did make the change to the file
> > > >
> > > > /home/epics1/EpicsDev/BLASThvApp/src/IonPol.map
> > > >
> > > > The problem is that, since we changed the 8th(starting from 0) channel from
> > > > S12.8 to S13.2 yesterday morning, right now when I try to change the DV's of
> > > > them by the medm file
> > > >
> > > > /home/blast/degrush/MEDMdev/IonPolCopntrol.adl
> > > >
> > > > the display info showed me that both S12.8 and S13.2 were manipulated by medm,
> > > > so there was a mess -- say, when I tried to change the DV of Channel 8, instead
> > > > of channel 8, another channel, maybe 9, i'm not sure now, was effected.
> > > > Can u figure out what was happening?
> > > >
> > > > BTW, Bill Franklin is a little worried about the accuracy of the DV's for all
> > > > the channles (CC, WC, etc., oper or stby states) read from HVGUI. If there is
> > > > a backup text file or some backup info in the logbog we can use to check these
> > > > setting?
> > > >
> > > > Thanks!
> > > >
> > > > Yuan
> >
>
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:29 EST