Since you changed 12.8 to 13.2 so that now you are not using 12.8, I'm unsure how
you determined 12.8 was changing unless you went to the crate level control and
saw it change. I just checked it right now and it seems to work.
In response to Bill's question, there is no log of the voltages. If you want to
see if they are currently set correctly go to the crate level control, and hit
"MV" and "DV" buttons and look at what appears in the ioc boot window. What will
be displayed are the send and receive messages for all the slots. Since there is
no mapping and gremlins aside, match up the slot/channel with your detector
channels. I haven't checked that the gui has mapped all the channels from the new
database correcly, so it is possible that something is wrong.
Cheers,
Adam
yxiao@MIT.EDU wrote:
> Hi, Adam,
>
> > To make them even more permanent, Yuan knows where the simple text file
> > that records them is.
>
> I did make the change to the file
>
> /home/epics1/EpicsDev/BLASThvApp/src/IonPol.map
>
> The problem is that, since we changed the 8th(starting from 0) channel from
> S12.8 to S13.2 yesterday morning, right now when I try to change the DV's of
> them by the medm file
>
> /home/blast/degrush/MEDMdev/IonPolCopntrol.adl
>
> the display info showed me that both S12.8 and S13.2 were manipulated by medm,
> so there was a mess -- say, when I tried to change the DV of Channel 8, instead
> of channel 8, another channel, maybe 9, i'm not sure now, was effected.
> Can u figure out what was happening?
>
> BTW, Bill Franklin is a little worried about the accuracy of the DV's for all
> the channles (CC, WC, etc., oper or stby states) read from HVGUI. If there is
> a backup text file or some backup info in the logbog we can use to check these
> setting?
>
> Thanks!
>
> Yuan
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:29 EST