For taking asymmetry data tonight and tomorrow:
_ We use 2 state flipping on H2
cd ~/pro20003/ABS; ABSsoft h_2st_flip...
- L/T holding field on, blast field on
_ Beam current max is 60 mA. Watch for cell temperature changes.
_ trigger is physics.settings
_ coda configuration is physrun
_ The Wch thresholds are 3.0 V.
_ "good" BQM values are 120/100/40/60 with slits in. Lifetime should be
very smooth as function of current, and generally above 20 mins. See logbook
_ hv is controlled by epics (no warnevent at the moment, dies after one fill)
_ epics is started *by hand* on the green window by the coda runcontrol screen
_ caserver may die (after warnevent dead you won't notice)
_ Compton: see BF email
_ The onlineGui is running on dblast14. It shows the wch S/N and all L/R
data online. Hit start, clear and then start to start fresh
- After a run is taken, analysis is done with "root lrn.C ###". Do also
"root charge.C ###" and then "root flrn.C ####" to filter and process charge
- The new lrn is ready but you'll still use the old one tonight.
_ Please mark analysed runs on the runsheet. Extra runsheets in ~pro2003/runsheet
_ IMPORTANTLY: please pay attention to ABS spin bits and ABS C-tube. You should
see beam helicity and abs spin change state. Ask available target expert.
Beam helicity should only change during refill of the ring.
_ Look at the reconstructed data.
- tancredi
________________________________________________________________________________
Tancredi Botto, phone: +1-617-253-9204 mobile: +1-978-490-4124
research scientist MIT/Bates, 21 Manning Av Middleton MA, 01949
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:29 EST