> I agree with Tancredi that an expert from the group working on each
> detector should check and finish the digitization and probably event the
> geom/set/hits part of the v3 blastmc.
I agree with myself but digitization is somewhat a difficult job. For adc
we need the "scale", or calibration, and that is quite important since
you select particles on that.
For CC you also need a conversion efficiency and it is somewhat more
difficult (you need a "sampling function" which is actually well known)
For tdcs we need propagation times + electronic offsets.. But I hold that
it is far more useful to do path-length/tof corrections to the data and
compare to MC true tof. It is more sensible to eventually select data on
true tof, not tdc value.
still, it is a long time before we really need this, and actually this
strictly needed only for cross sections.
> the time for light to travel from the hit to the PMT's on TOF paddles are
> calculated by the vertical distance between the hit and the ends of the
> paddle, not the distance along the paddle itself.
I think you meant the light propagation speed in the scintillator + tdc
offset + e- offsets but see above....
>
> Chi
>
> On Tue, 8 Apr 2003, Tancredi Botto wrote:
>
> >
> > I've submitted a few changes to blastmc v3 (after fresh update).
> > Here is a (slightly re-edited) cvs log
> >
> >
> >
> > _ Added some comments in fort99 - gives pointer to dgen/epel info
> >
> > _ blast.geom: added realistic scattering chamber geometries (cell walls,
> > exit foil). Having all 8 cerenkovs is now default.
> >
> > - removed old geom files, blast.geom is the only geom file in v3
> >
> > _ Added a "forward" cerenkov set with n=1.02 (all else have 1.03)
> >
> > _ Cerenkov digitization buggy: forced ADC = Nphotoelectrons. However this
> > number is way too high (30 PE!!) I think. Note: all detector digitization seem
> > only tentative
> >
> > _ If energy loss = 0 then tdc=-1 (tof/sb/nc). This fixes a problem with
> > geant (the tdc is always computed, also for neutrals, since it depends
> > only the tracking time of flight) and the data analysis (the tdc is used
> > to select events)
> >
> >
> >
>
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:29 EST