hi everyone,
good news--the blast libraries (blastmc & BlastLib2) can be compiled
on redhat 8.0 now. note that you must install the older gcc-2.96, and
use that instead of the standard gcc-3.2. attached is a sketch of the
steps needed to get it running. hopefully this will be updated to the
software webpage soon.
--chris
p.s. alaine, i used the procedure on blast@asublast1:blast2, so you can
take a look at it.
redhat disk2 as root:
rpm -i --force /mnt/cdrom/RedHat/RPMS/compat-{gcc,lib}*
on blast05:
tar zcf cern.tgz -C /usr/local/cern
tar zxf cern.tgz
download root: "Intel x86 Linux for Redhat 7.2 and gcc 2.96, version
3.04/02"
tar zxf root_v3.04.02.Linux.RH7.2.gcc296.tar.gz
source .setup #with content similar to:
setenv CERNLIB /cern/cernlib/2002/lib
setenv ROOTSYS $HOME/root/pro
setenv LD_LIBRARY_PATH .:${ROOTSYS}/lib
setenv PATH .:${ROOTSYS}/bin:/cern/cernlib/2002/bin:${PATH}
setenv CVS_RSH ssh
setenv BLAST_PARAM $HOME/blast2/Blast_Params
cvs -duser@blast05.lns.mit.edu:/home/blast/cvsroot co -d blast .
cd blast
cvs up -rv2 blastmc Blast_Params
cvs up -rv2_5 BlastLib2
autoconf
configure CC=gcc296 CXX=g++296 --enable-debug #debug optional
make all install
cd run
blast -f fort.99
trig 100
exit
nsed
<next>
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:29 EST